Replacement ice maker module used for some Amana, Dacor, Estate, Ikea, Jenn-Air, Kenmore, KitchenAid, Maytag, Roper, Thermador, and Whirlpool refrigerator models.
Directly Replaces: 8201515, W10190934, 626653, 626678, 626683, 626691, 628519, 8201515VP, W10122535, W10223929, W10251742, W10311985, IMM1515, 961550, AH733947, AP3177342, EA733947, EAP733947, PD00003956, PS733947.
Features:
- Ice maker module repair kit.
- Used for some 8-cube, 'In-Door', ice makers.
- Includes (1) Module Motor, (1) Ice Shedder, and (1) Ejector Arm.
Specifications:
- Color: Brown / White.
- Material: Plastic / Metal.
- Electrical Specs: Module 115V, 60Hz, 185W, 1.6A.; Synchronous Motor 120VAC, 60Hz, 1.5W, CCW.
- Module Dimensions: 4-1/4"L x 2-1/4"W x 4-3/8"H.
- Additional Dimensions: Ejector bar measures 8 7/8"L x 1 1/2"W x 1/2"H. Ice Shedder measures 9"L x 3 1/8"W x 1 3/4"H.
Compatible Models:
Don't see your model listed? Submit this form to get help finding the right part.
Repair Skill Level: 2 | Beginner to Moderate
Minimal disassembly (if any) and some basic tools may be needed.
Part Description: The auger motor turns the ice auger that pushes ice through the dispenser chute.
Failure Symptoms: Ice maker not dispensing ice.
Testing: Pull out the ice bucket and turn the auger by hand. If it will turn freely, use a multimeter to test the auger motor for continuity. If there is now continuity, or the motor is getting power and still isn't running, it should be replaced.
Bonus Tip: If your freezer temperature is more than 10 degrees Fahrenheit, the ice maker will not work efficiently. The temperature inside the freezer compartment should be between 0 and 5 degrees Fahrenheit for proper ice maker functionality.
Disclaimer: Information and recommendations contained herein are believed to be accurate as of the date hereof. Since the conditions and methods of use of the information referred to are beyond control, ApplianceRepairForum.com and Thrifty Appliance Parts LLC, cannot be held liable for results obtained or arising from use or reliance on such information.
The User assumes responsibility associated with making test measurements, adjustments, parts replacements and any other action necessary to perform any recommended procedures. It is the responsibility of the User to ask for clarification if a recommendation is not fully understood, including the risks and hazards associated with the recommended procedures.
