Replacement hi-limit thermostat and thermal fuse set used for some Maytag and Whirlpool dryer models.
Directly Replaces: WP3977767, AP6009043, 3977767, 3399693, ER3977767, PS11742185, SET185, TJ90SET185, WP3977767VP, B008DJVSXS, B00PDXAQH6, B009HAFMI4, B0081EAP5W, B00PDXAMMK, B00LW6VH58, B00IQ9VKV0, B0156N9ZRO, B00DM8KR1E, B00OBF5NRA, SET197, N197, LET197, ER197, 3977393.
Features:
- Prevents the dryer from overheating if the high limit thermostat fails.
- Includes (1) 3977393 Thermal Fuse, (1) 3977767 Hi-Limit Thermostat.
- 'Old-style' limit and fuse set slides onto the heating element terminal. This not only connects it to the heating element, but also secures it to heater assembly without any additional hardware, such as screws.
- For the 'new-style' 3390291 thermostat and 3977393 fuse replacement kit, order APN279816.
Specifications:
- Color: Black/White.
- Material: Plastic / Ceramic / Metal.
- Thermostat Dimensions: 2-3/8"L x 1-1/2"W x 1"H.
- Thermostat: 250°F open, 170°F close.
- Thermal Fuse Dimensions: 2"L x 1-3/4"W x 1"H.
- Thermal Fuse: Rated at 325°F.
APN197 Hi-limit Thermostat & Thermal Cut-Off Fuse Set Specifications:
- Hi-limit Thermostat (3977767 Replacement)
- Color: Black / Gray / Brass.
- Material: Plastic / Metal.
- Electrical Specs: L250-80F: 250°F open, 80°F differential, 170°F close.
- Dimensions: 1-1/2"L x 1-1/8"W x 2"H; 1-5/8" between mounting holes (center to center).
- Thermal Cutoff Fuse (3977393 Replacement)
- Color: White / Gray.
- Material: Ceramic / Metal.
- Electrical Specs: L309F, One-Time Fuse (must be replaced once blown).
- Dimensions: 1-1/4"L x 1-1/4"W x 2-3/16"H; 1-5/8" between mounting holes (center to center).
Compatible Models:
Don't see your model listed? Submit this form to get help finding the right part.
Repair Skill Level: 2 | Beginner to Moderate
Minimal disassembly (if any) and some basic tools may be needed.
Part Description: The thermal cut-off kit prevents the dryer from overheating if the high limit thermostat fails.
Failure Symptoms: Dryer will not heat at all, or takes an increasing amount of time to dry your clothes.
Testing: Use a multimeter to test it for continuity in the fuse and thermostat. If there is no continuity in either piece, it should be replaced.
Bonus Tip: A blown thermal fuse indicates a restriction in the exhaust vent that runs from the dryer to the outside. Be sure to check the dryer venting whenever you need to replace the thermal fuse.
Disclaimer: Information and recommendations contained herein are believed to be accurate as of the date hereof. Since the conditions and methods of use of the information referred to are beyond control, ApplianceRepairForum.com and Thrifty Appliance Parts LLC, cannot be held liable for results obtained or arising from use or reliance on such information.
The User assumes responsibility associated with making test measurements, adjustments, parts replacements and any other action necessary to perform any recommended procedures. It is the responsibility of the User to ask for clarification if a recommendation is not fully understood, including the risks and hazards associated with the recommended procedures.
-
Dryer
Worked great
-
Dryer parts
The parts were a perfect match and cheaper than most everyone with fast delivery.
-
good
Part works , fast delivery. Just what i needed.
-
Fuse replacement
Exactly the correct part....And was $32 cheaper than parts store in town. Outstanding !!!
-
Sensor
Exactly the correct part....And was $32 cheaper than parts store in town. Outstanding !!!
-
Great service!
Great transaction! Product arrived quickly and was exactly what I ordered! Dryer works better now than it ever has! Thanks for the great service.
-
Quick fix
This part was a quick fix. Dryer is working great.
-
Good as new
Part arrived on time and works perfectly
-
whirlpool dryer limit and fuse kit
Parts worked perfectly. Price was very reasonable. Delivery was very quick. Quality is very good.
